Fujitsu SPARC T5440 Manual do Utilizador descarregar pdf (Página 71)

Managing Faults 45

Note – The Service Required LED is also turned on for PSH diagnosed faults.

Related Information

■ “Diagnostic Flowchart” on page 11

■ “Solaris Predictive Self-Healing Overview” on page 17

■ “ILOM-to-ALOM CMT Command Reference” on page 53

■ SPARC Enterprise T5440 Server Administration Guide

■ Integrated Lights Out Manager 3.0 Supplement for SPARC Enterprise T5440 Server

▼ Detect Faults Identified by the Solaris PSH

Facility Using the ILOM fmdump Command

The ILOM fmdump command displays the list of faults detected by the Solaris PSH

facility and identifies the faulty FRU for a particular EVENT_ID (UUID).

Note – Do not use fmdump to verify that a FRU replacement has cleared a fault,

because the output of fmdump is the same after the FRU has been replaced. Use the

fmadm faulty command to verify that the fault has cleared. See “Clear Faults

Detected by PSH” on page 49.

1. Check the event log using the fmdump command with -v for verbose output.

In CODE EXAMPLE: Output from the fmdump -v Command on page 46, a fault

is displayed, indicating the following details.

■ Date and time of the fault (Jul 31 12:47:42.2007)

■ Universal Unique Identifier (UUID). The UUID is unique for every fault

(fd940ac2-d21e-c94a-f258-f8a9bb69d05b)

■ Message identifier, which can be used to obtain additional fault information

(SUN4V-8000-JA)

■ Faulted FRU. The information provided in the example includes the part

number of the FRU (part=541215101) and the serial number of the FRU

(serial=101083). The Location field provides the name of the FRU. In

CODE EXAMPLE: Output from the fmdump -v Command on page 46 the FRU

name is MB, meaning the motherboard.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 213 214

Sem comentários

Fujitsu SPARC T5440 Manual do Utilizador Página 71